Double DIN Head Unit Nav Pod for Subaru Forester SG (2003-2008, 2nd Gen)

D3D is proud to present our Double DIN Head Unit Nav Pod for the SG Forester, designed and made in-house. Many know of the elusive Nav Pod that was originally available for the SG Forester in the Japanese market, which allowed a touchscreen head unit to be mounted at the top of the dashboard for easier and safer use. Due to its rarity, this part is now difficult to source and usually too expensive to justify, even when in poor condition.

We have created our own design for those who want to mount their head unit in the JDM location without having to dig around used eBay listings. Mounting your head unit in this raised location reduces distraction by making the screen easy to see at a glance, allowing you to direct more focus on the road ahead. Our kit comes with everything you need, and includes the following:

• Head Unit Pod Shell
• Head Unit Brackets (left and right)
• Front Filler Trim Piece
• All required screws for installation
• Built-in microphone with 2.5mm and 3.5mm jack compatibility (optional)
• 60cm Antenna Extension Wire

Please note - you may need to extend the wiring to the head unit depending on your setup/brand. If you have a typical wiring loom adapter fitted (e.g. Aerpro APP090) with the wiring loom included with your head unit, this will usually reach without extension. This kit doesn't come with the double DIN head unit pictured. We recommend going with a reputable brand as many of the cheap no-name units out there don't use the standard screw hole arrangement. Please see the last product image for the maximum head unit depths that will work with our kit (depth is measured from the face of the Nav Pod, not from the face of the head unit itself.

We also have multiple designs available to fill the void in the original head unit location, which can be found here. And while you're at it, complete the upgrade with our Speaker Adaptor Kits!

Note - this is currently a made to order item. Please allow 10 days after ordering to receive a shipment confirmation.

Diverge 3D is committed to providing you with the best possible experience through our products and accompanying instruction guides. However, we cannot accept responsibility for any damage, injury, or other consequences that may occur during installation or use. Please ensure you are familiar with and comply with your local laws regarding vehicle modification. As this is an aftermarket product, it has not undergone crash testing and its performance in an accident is unknown. Do not allow the use of our products to distract you from your surroundings or affect your control of the vehicle. Any electrical work is undertaken at your own risk. If you are not confident in carrying out such work, we recommend seeking assistance from a qualified professional.